SINTX Reports Pivotal Third Quarter Business Update and Financial Highlights Driven by FDA Clearance, Product and IP Portfolio Expansions and Increased Operational Efficiencies
13-Nov-2025 08:00:10 EST
SINTX Reports Pivotal Third Quarter Business Update and Financial Highlights Driven by FDA Clearance, Product and IP Portfolio Expansions and Increased Operational Efficiencies
GlobeNewswire November 13, 2025
Company underscores its strengthened liquidity, cost reductions, and first revenue recorded from OsseoSculpt(TM)
SALT LAKE CITY, Utah, Nov. 13, 2025 (GLOBE NEWSWIRE) — SINTX Technologies, Inc. (NASDAQ: SINT) (“SINTX” or the “Company”), an advanced ceramics and biomaterials company focused on silicon-nitride-based medical technologies, today provided a business update reporting third quarter financial results in conjunction with the filing the Company's Form 10-Q for the quarter ended September 30, 2025.
During the third quarter and subsequent weeks, SINTX advanced a focused commercialization plan centered on infection-resistant silicon nitride devices and polymer composites, while tightening its operating footprint and strengthening its balance sheet.
Business Highlights and Key Milestones
FDA 510(k) Clearance: Received U.S. FDA clearance for the SINAPTIC(R) Foot & Ankle Osteotomy Wedge System, enabling SINTX's commercial entry into reconstructive foot and ankle surgery in the U.S.
Initial Product Revenue: Recorded first commercial revenue from the private-labeled orthobiologic product OsseoSculpt(TM), a companion biologic to the SINAPTIC wedge portfolio.
Facility Optimization: Executed a sublease of the Armor facility, estimated to save up to approximately $950,000 in lease costs over the sublease term, further aligning operating resources with its medical device priorities.
Broadened IP Portfolio: United States Patent and Trademark Office (USPTO) issued Notice of Allowance for patent application containing method claims covering the Company's antipathogenic fabric technology.
Strengthened Liquidity: Raised an additional $4.3 million in gross proceeds through warrant inducement and common stock warrant exercises.
Third Quarter 2025 Financial Results:
Cash and cash equivalents were $6.25 million on September 30, 2025, compared with $3.60 million on December 31, 2024, reflecting financing activity and disciplined working-capital management.
Revenue of $0.2 million, a decrease as compared to $0.8 million in Q3 2024, primarily related to a reduction in grant revenue recognized compared to the prior period.
Operating expenses of approximately $3.4 million, a decrease of 51% year-over-year.
Operating loss of $3.4 million compared to $6.4 million in Q3 2024.
Net loss of $3.5 million, representing a loss of $1.19 per fully diluted share, compared to net loss of $6.2 million representing a loss of $6.96 per fully diluted share in Q3 2024.
Adjusted EBITDA loss of $2.3 million in Q3 2025 compared to $6.1 million in Q3 2024.
“We have aligned SINTX squarely behind near-term commercial milestones with our advanced biomaterial products,” said Eric Olson, President and CEO of SINTX. “The 510(k) clearance for our SINAPTIC foot & ankle wedge system represents a pivotal milestone that validates our technology and establishes a scalable platform for future growth. We believe the decisive actions we have taken to monetize non-core assets, streamline facilities, and maintain prudent access to capital position the Company to execute this strategy effectively. The Company remains focused on advancing clinical leadership into sustainable product revenue opportunities, while building broader commercial utilization around silicon nitride's unique clinical advantages.”
Looking ahead, SINTX's near-term priorities include: (i) preparing the SINAPTIC wedge system for launch; (ii) expanding clinical and key opinion leader (KOL) engagement in targeted surgical specialties; and (iii) leveraging its material science into adjacent indications — including polymer composites for 3D printed custom and patient specific implants — where silicon nitride's antipathogenic and bone-affinity attributes can be most impactful. Management also intends to continue evaluating partnering, licensing, and capital formation options that we believe will accelerate market access and enhance shareholder value.
For more information on SINTX Technologies or its materials platform, visit www.sintx.com.
About SINTX
Headquartered in Salt Lake City, Utah, SINTX Technologies, Inc. (NASDAQ: SINT) is an advanced ceramics company that develops, manufactures, and commercializes silicon nitride biomaterials, composites, devices, and related technologies for medical and other high-value applications. With thousands of medical devices implanted since 2008 and nearly two decades of peer-reviewed research, SINTX has established itself as a leader in high-performance biomaterials that enhance clinical outcomes and patient safety. Supported by a strong patent portfolio, U.S.-based manufacturing, and strategic industry partnerships, the company continues to expand its technology platform through innovation and market diversification, including the recently FDA-cleared SINAPTIC(R) Foot & Ankle Osteotomy Wedge System for reconstructive surgery.
Non-GAAP Financial Measures
This press release contains adjusted EBITDA, which is a non-GAAP measure defined as net income excluding depreciation and amortization, income tax (benefit) expense, net interest (income) expense, stock-based compensation, change in fair value of contingent consideration, realized gain (loss) on investments, and (gain) loss on disposition of assets. The Company believes that adjusted EBITDA provides useful information to management and investors relating to its results of operations. The Company's management uses this non-GAAP measure to compare the Company's performance to that of prior periods for trend analyses, and for budgeting and planning purposes. The Company believes that the use of adjusted EBITDA provides an additional tool for investors to use in evaluating ongoing operating results and trends and in comparing the Company's financial measures with other companies, many of which present similar non-GAAP financial measures to investors, and that it allows for greater transparency with respect to key metrics used by management in its financial and operational decision-making. Adjusted EBITDA may differ from similarly titled measures used by other companies and should not be considered in isolation or as a substitute for measures of financial performance prepared in accordance with GAAP. Management uses Adjusted EBITDA solely as a supplemental tool to evaluate operating performance and for internal budgeting and planning purposes.
Management does not consider the non-GAAP measure in isolation or as an alternative to financial measures determined in accordance with GAAP. The principal limitation of the non-GAAP financial measure is that it excludes significant expenses that are required by GAAP to be recorded in the Company's financial statements. In order to compensate for these limitations, management presents the non-GAAP financial measure together with GAAP results. Non-GAAP measures should be considered in addition to results prepared in accordance with GAAP, but should not be considered a substitute for, or superior to, GAAP results. A reconciliation table of the net income, the most comparable GAAP financial measure to adjusted EBITDA, is included at the end of this release. The Company urges investors to review the reconciliation and not to rely on any single financial measure to evaluate the company's business.
Forward-Looking Statements
Certain statements in this release constitute “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995, including, without limitation, statements regarding SINTX Technologies' commercialization plans and expected timing for the SINAPTIC Foot & Ankle Osteotomy Wedge System; potential surgeon adoption, clinical engagement, and commercial performance; anticipated benefits of facility optimization and financing activities; and the Company's expectations regarding market opportunities, product development, and shareholder value creation. Forward-looking statements are based on current expectations, estimates, and projections about future events and are often identified by words such as “may,” “will,” “could,” “should,” “would,” “expect,” “plan,” “anticipate,” “intend,” “believe,” “estimate,” “project,” “target,” “seek,” “continue,” and similar expressions.Plans and projections are subject to change based on market conditions, regulatory developments, and other factors beyond the Company's control. These statements involve risks and uncertainties that could cause actual results to differ materially from those expressed or implied, including, among others, risks related to commercialization execution, surgeon training and utilization, market acceptance, manufacturing scale-up, supply chain constraints, pricing and reimbursement, competitive products, intellectual property protection, integration of business operations, macroeconomic conditions, and reliance on third-party market estimates. FDA 510(k) clearance does not assure commercial success, and any discussion of potential infection-prevention or bone-affinity attributes of silicon nitride reflects materials-level research and is not part of the cleared indications for this product. Additional risks and uncertainties are described in SINTX's filings with the Securities and Exchange Commission, including its most recent Annual Report on Form 10-K and Quarterly Reports on Form 10-Q, available at www.sec.gov. Forward-looking statements speak only as of the date of this release, and SINTX undertakes no obligation to update them, except as required by law.
SINTX Contacts:
Jack Perkins or Maria Hocut KCSA Strategic Communications Sintx@kcsa.com
SINTX Technologies, Inc. 801.839.3502 IR@sintx.com
SINTX Technologies, Inc. Condensed Consolidated Balance Sheets – Unaudited (in thousands, except share and per share data)
September 30, 2025
December 31, 2024
Assets
Current assets:
Cash and cash equivalents
$
6,250
$
3,598
Account and other receivables, net of allowance for credit losses of $4.2 and $61.0 respectively
120
196
Prepaid expenses and other current assets
577
475
Inventories
447
502
Total current assets
7,394
4,771
Inventories, net
402
465
Property and equipment, net
507
922
Intangible assets, net
150
16
Goodwill
302
–
Operating lease right of use asset
2,536
3,159
Other long-term assets
73
80
Total assets
$
11,364
$
9,413
Liabilities and Stockholders' Equity
Current liabilities:
Accounts payable
$
203
$
299
Accrued liabilities
1,050
986
Debt
59
32
Derivative liabilities
870
208
Current portion of operating lease liability
384
456
Other current liabilities
1,781
1
Total current liabilities
4,347
1,982
Operating lease liability, net of current portion
2,949
3,537
Total liabilities
7,296
5,519
Commitments and contingencies
Stockholders' equity:
Convertible preferred stock Series B, $0.01 par value, 130,000,000 total shares authorized inclusive of all series of preferred; 19 shares issued and outstanding as of September 30, 2025 and December 31, 2024.
–
–
Convertible preferred stock Series C, $0.01 par value, 130,000,000 total shares authorized inclusive of all series of preferred; 50 shares issued and outstanding as of September 30, 2025 and December 31, 2024.
–
–
Convertible preferred stock Series D, $0.01 par value, 130,000,000 total shares authorized inclusive of all series of preferred; 180 shares issued and outstanding as of September 30, 2025 and December 31, 2024.
–
–
Common stock, $0.01 par value, 250,000,000 shares authorized; 3,666,280 and 1,342,853 shares issued and 3,615,856 and 1,342,853 outstanding as of September 30, 2025 and December 31, 2024, respectively.
36
13
Treasury Stock, 50,424 shares as of September 30, 2025
(133
)
–
Additional paid-in capital
294,052
285,619
Accumulated deficit
(289,887
)
(281,738
)
Total stockholders' equity
4,068
3,894
Total liabilities and stockholders' equity
$
11,364
$
9,413
SINTX Technologies, Inc. Condensed Consolidated Statements of Operations – Unaudited (in thousands, except share and per share data)
Three Months Ended September 30,
Nine Months Ended September 30,
2025
2024
2025
2024
Product revenue
$
150
$
367
$
541
$
1,054
Grant and contract revenue
58
432
187
1,291
Total revenue
208
799
728
2,345
Costs of revenue
115
210
455
657
Gross profit
93
589
273
1,688
Operating expenses:
Research and development
1,264
796
3,618
4,492
General and administrative
2,102
802
4,836
2,997
Sales and marketing
59
87
100
589
Armor exit costs
–
4,457
–
4,457
Reduction in force
–
407
–
407
Grant and contract expenses
23
448
122
1,061
Total operating expenses
3,448
6,997
8,676
14,003
Loss from operations
(3,355
)
(6,408
)
(8,403
)
(12,315
)
Other income (expenses):
Interest expense
(13
)
(9
)
(40
)
(15
)
Interest income
43
24
130
66
Gain (loss) on disposal of equipment
–
(20
)
327
(8
)
Change in fair value of derivative liabilities
(214
)
173
(166
)
3,459
Offering costs of derivative liabilities
–
–
–
(550
)
Other income, net
–
1
3
34
Total other income, net
(184
)
169
254
2,986
Net loss before income taxes
(3,539
)
(6,239
)
(8,149
)
(9,329
)
Provision for income taxes
–
–
–
–
Net loss
$
(3,539
)
$
(6,239
)
$
(8,149
)
$
(9,329
)
Deemed dividend related to warrant inducement
(6,719
)
–
(6,719
)
–
Net loss attributable to common stockholders
$
(10,258
)
$
(6,239
)
$
(14,868
)
$
(9,329
)
Net loss per share – basic and diluted
Basic – net loss
$
(1.19
)
$
(6.96
)
$
(3.38
)
$
(17.30
)
Basic – deemed dividend related to warrant inducement
(2.27
)
–
(2.79
)
–
Basic – attributable to common stockholders
$
(3.46
)
$
(6.96
)
$
(6.17
)
$
(17.30
)
Diluted – net loss
$
(1.19
)
$
(6.96
)
$
(3.38
)
$
(19.59
)
Diluted – deemed dividend related to warrant inducement
(2.27
)
–
(2.79
)
–
Diluted – attributable to common stockholders
$
(3.46
)
$
(6.96
)
$
(6.17
)
$
(19.59
)
Weighted average common shares outstanding:
Basic
2,963,539
896,305
2,411,004
539,252
Diluted
2,963,539
897,323
2,411,179
656,468
SINTX Technologies, Inc. GAAP AND NON-GAAP MEASURES (Unaudited)
